Creating Partition Using cfdisk

Manipulating and partitioning hardisk can be a daunting task, especially for new sysadmin and if the disk has already contain data. Luckily, there is a tool that make this task easier, and that tool is called cfdisk.

First, we need to identify our disk name. This can be achieved by running lsblk

$ lsblk

Above is a sample output of lsblk. We can see that our disk name is sda (append /dev/ to the name for full path), and it has 130GB size. We can also see that only around 30GB has been used. We should have 100GB worth of free space for our new partition.

To start using cfdisk, just run it against the path of our disk, in this case /dev/sda

$ sudo cfdisk /dev/sda

We should be able to see this interface

Move the cursor using the down arrow key on our keyboard, so that the cursor lies on the 107374.19MB line

Make sure your cursor is at "New" button, and press Enter.

Choose "Primary" and press Enter.

We want to use the whole free space, so just leave the size as it is, and press Enter.

We now have a partition ready. To actually write the partition to the partition table, move your cursor using the right arrow key on the keyboard until it reached the "Write" button, and press Enter.

We will get  a warning message. Type "yes" and press Enter to confirm this action.

We will get this message once the partitioning is complete.

Quit cfdisk by choosing "Quit" and press Enter

Eventhough we have created the partition, but sometimes the partition table is not automatically updated. Run "partprobe" to inform the OS of the partition table change.

$ sudo partprobe

Use "lsblk" to see that the new partition has been created

$ lsblk

Extending LVM By Adding New Disk To a Virtual Machine

In previous post, we have covered the way to make LVM and filesystem aware of the disk size increase that happen in the virtual machine layer. 

There is another way to increase LVM volume capacity, that is to add new disk into the system. 

1. First, shutdown the virtual machine

2. Add a new virtual disk size into the virtual machine manager

3. Start the virtual machine

4. Check the new disk availability for LVM

$ sudo lvmdiskscan

5. To be able to use the new disk, it needs to be converted into physical volume (PV)

$ sudo pvcreate <path to the new disk>

6. Check list of PVs. Memorize the PV name

$ sudo pvs

7. Extend the volume group using the new PV

$ sudo vgextend <VG name> <PV name>

We can get the name of the VG by using this command. This command also will show how much free space is now available in the VG.

$ sudo vgs

8. Increase the size of logical volume, to use 100% of the free space available inside VG, using this command

$ sudo lvextend -l +100%FREE <LV PATH>

We can get the full  path of LV using this command

$ sudo lvdisplay | grep Path

9. Now, make the filesystem aware that the partition size has been increased. The command to do this differ from filesystem to filesystem, but we include 2 of the most used (based on our experience) filesystem

For xfs:

$ sudo xfs_growfs <mountpoint>

For  ext4:

$ sudo resize2fs <mountpoint>

10. Verify that the mountpoint is now increase in size

$ df -Th